Four Side Sealing Face Mask Packaging Machine supplier| SOONPACK

4-side Sealing Face Mask Packaging Machine

This packaging machine is designed for wrapping face mask, such as KN94, N95, fish mask, 3-layer disposable mask, in 4-side sealing result.

FREE Consult PDF SPEC

Maximum Speed: Bag Size:

60-140 bags/min Length: 100-300mm

Width: 80-150mm

4-side sealing face mask wrapping machine introduction and price

This machine is disgned for face mask 4-side sealing purpose, packaging film could be one roll or two rolls, which is based on customer packagin request. If use two rolls film, the bottom one should be clear type (no printing) normally.

4-side sealing machine packaging proccess:

Put or load face mask one by one on packaging machine's infeed conveyor.
Infeed conveyor will carry and deliver products to packaging film surface.
Hot Sealed by reciprocating device, which can insure good sealing results.
Cuttting and output.

4-side sealing face mask packaging machine price is around USD33,000.00-40,000.00/SET based on different configurations.

Frequency Asked Questions for 4-side sealing face mask packaging machine

Question 1: Can I use this machine to pack different size products?

Answer: This machine is customized according to products size, the packaging scope is fixed once machinery finished. It is better for you to list all the potential products size you want to pack, we will check and give recomendations.

Question 2: Can this machine make vacuum packaging?

Answer: No, this machine is horizontal type flow wrapper, not vacuum packaging machine.

Question 3: What is packaging film material, where to buy this film?

Answer: The packaging film is requested composite membrane, aluminum-plastic film, pure aluminum film, aluminum plating film, laminating paper, etc. , because the consumbale material, it is better for you to find a film supplier locally, if you do need such service, can contact us for help.

Question 4: Do you have machine for cartoning face mask after first packaging?

Answer: Yes, check our cartonning machines here.

Four side sealing face mask packaging machine video

Specifications For 4-side Sealing Face Mask Packaging Machine

Packing film width: 400-780mm

Packing material: PE/OPP PE/PET,pure aluminum film, aluminum plating film,laminating paper, etc.

General power: 2.7KW

Power supply type: 380V, 50HZ, 3PH

Machine weight: 2750kgs

Machine dimensions: L4200mm*W1400mm*H1800mm

Features For 4-side Sealing Face Mask Packaging Machine

Unique reciprocating heat sealing system, insure a good sealing result.

3 lanes infeed conveyor,Packing speed 60-140 bags/min, high efficiency.

3 servo driven with touch screen operation, easy for use.

SUS304 material body,organic glass shield.

Suitable for composite membrane, aluminum-plastic film, pure aluminum film, aluminum plating film, laminating paper, etc.

No film stop, counting alarm function available.

Hole punching device,Date printer,Labeling device are available for choice.

Option Configurations

Date printer
Dessicant dispenser
Card dispenser
Labeling machine

Cartridge feeder
Automatic packing system
Stacking machine
Nitrogen generator

Payment&Shipment&Warranty term

Payment: T/T is prefered, 30% of cargoes value to be paid after signed the contract, the balance to be paid before shipment. L/C is acceptable.
Leading time: 40-50 days various from machine’s quantity and configurations.
Warranty period: 1 year from the date of shipment, whole life maintenance supports.
After sales service: Free on line supports, by customer request, we can send engineer abroad for service, the relevant fee will be charged separately.

Maintenance&Spare parts for 4-side sealing face mask packaging machine

1. Maintenance and clean for machine every day or every shift.

(1) Clean the machine each time after packaging.
(2) Turn off the power before cleaning the machine.
(3) Never spray the water or steam directly on the machine when cleaning.
(4) Main components to be cleaned:

Remove the product chips stored up in the conveyance line of the product by compressed air or in other way.
Brush off the film chips adhered to the sealing surface of the sealer by the wire brush applied with the silicone oil.
Clear the dirt on the control board, safety cover and painted surface by a piece of soft cloth.
Conductive ring of the temperature controller: clean it once a week or two weeks. Clean the conductive ring by the back of the sandpaper when the master power is cut off.

2. Maintenance and clean for machine every month.

(1) Apply the lubricating grease on the bearing of the sealer (sealing tool unit) at the end.
(2) Apply the lubricating grease on the gear and chain (pulley) of the driving unit.
(3) Check the tightness of the chain and belt of the driving unit, and tighten the loosed one.
(4) Check the tightness of the fastening screw or nut of all parts, and tighten the loosed one.

3. Relevant inspection for machine once a half year.

(1) Check the wear intensity of the belt of the driving unit, and replace the worn-out one.
(2) Check the wear intensity of the rubber roller, and replace the one affecting the film advancing effect.
(3) Properly adjust the brake unit of the film carrying roller.
(4) Check all wearing parts, and immediately replace the damaged one.
(5) Check the fastness of the wiring on the electrical terminal plate, and tighten the loosed one. Check the frequency converter and electric circuit board, and remove the dust or dirt on them.